| commit | author | age | ||
| f83421 | 1 | # Enable NFC on Dell ControlVault2 and ControlVault3 |
| ec8c66 | 2 | |
| JK | 3 | ## Introduction |
| 4 | ||
| 5 | Recent Dell laptops - i.e. E7470 - contain integrated Broadcom NFC (contactless), (contacted) chip card and fingerprint reader (USB 0a5c:5834 - Broadcom BCM5880 USH). | |
| 6 | ||
| 7 | The contacted card reader works out of the box on Linux, yet NFC reader does not - no RF field is present. | |
| 8 | ||
| 9 | Instructions from [blog.g3rt.nl](https://blog.g3rt.nl/enable-dell-nfc-contactless-reader.html) are not applicable: the ushdiag.exe does not recognize the device at all. | |
| 10 | ||
| 11 | This project aims to enable Linux to read NFC cards the same way Windows does. | |
| 12 | ||
| 13 | ## Usage | |
| 14 | ||
| 15 | 1. Clone the repository. | |
| 16 | 1. Install python3 and python3-usb. | |
| f83421 | 17 | 1. Run: `./nfc.py on` (use `sudo` if necessary). |
| ec8c66 | 18 | 1. Run `pcsc_scan` or whatever you prefer. |
| JK | 19 | 1. Enjoy! |
| 20 | ||
| 21 | To disable the reader replace `on` with `off`. | |
| 22 | ||
| 23 | ## Supported devices | |
| 24 | ||
| 25 | Currently only the following devices were tested and are known to work: | |
| 26 | ||
| f83421 | 27 | * `0a5c:5832` (ControlVault 2), |
| JK | 28 | * `0a5c:5834` (ControlVault 2), |
| 29 | * `0a5c:5843` (ControlVault 3). | |
| ec8c66 | 30 | |
| JK | 31 | Firmware update (done during driver installation on Windows) may be required. |
| 32 | ||
| 8287e9 | 33 | ## Tested on |
| JK | 34 | |
| 04e698 | 35 | * Dell Latitude 5480 |
| 6b959a | 36 | * Dell Latitude 5491 |
| 04e698 | 37 | * Dell Latitude 7280 |
| e75db2 | 38 | * Dell Latitude 7290 |
| MJ | 39 | * Dell Latitude 7390 |
| f83421 | 40 | * Dell Latitude 7400 |
| 04e698 | 41 | * Dell Latitude E5270 |
| 9f147e | 42 | * Dell Latitude E5570 |
| 04e698 | 43 | * Dell Latitude E7470 |
| JK | 44 | * Dell Latitude E7490 |
| 8287e9 | 45 | |
| ec8c66 | 46 | ## How it works? |
| JK | 47 | |
| f83421 | 48 | Python script sends the same sequence of commands the Windows driver does. The traffic was sniffed using USBPcap and Wireshark (kudos to [~jkramarz](https://github.com/jkramarz) and [~lgarbarini](https://github.com/lgarbarini) and for that). |
| ec8c66 | 49 | |
| JK | 50 | The data is sent as-is and responses are read, but no error-checking is done. |
| 51 | ||
| f83421 | 52 | The semi-annotated traffic dumps are available as [traffic_cv2.txt](traffic_cv2.txt) and [traffic_cv3.txt](traffic_cv3.txt) - feel free to decode it further! |
| ec8c66 | 53 | |
| f83421 | 54 | The communication protocol is based on NCI (NFC Controller Interface). Unfortunately the specs are not freely available and some proprietary extensions are used. libnfc-nci and kernel sources were used to decode vendor-independent structs. |
| ec8c66 | 55 | |
| JK | 56 | ## References |
| 57 | ||
| 58 | * https://android.googlesource.com/platform/external/libnfc-nci/ - the driver of NFC component (BCM 20795), | |
| 59 | * https://blog.g3rt.nl/enable-dell-nfc-contactless-reader.html - this does not work on E7470. | |
